Intec Hg80 | Nema-4x | Humidistats | Controlsystemsusa
Process Control Instrumentation, Field Devices and Industrial Automation




$262.36  [2 Weeks]
Intec HG80 Duct Electro-mechanical Humidistat to detect 0-100% relative humidity in the air. Polyga bands sensor. Continuous monitoring. SPDT output. NEMA13 or NEMA4X enclosures. CE Listed.


Protector Gauze

 2 Weeks  ]

Electro-mechanical humidistats, to detect and control relative humidity in the air.


To sense the relative humidity level in air, and for low- or line-voltage on/off single-stage control of humidifiers, dehumidifiers, compressors, solenoids, valves, relays, and other electrical equipment in commercial and industrial environments, i.e., offices, computer rooms, food storage warehouses, greenhouses, indoor swimming pools; dairy-, textile-, paper- and printing plants, and many more.

  • Continuous monitoring
  • Humid- or dehumidification on/off control
  • Switched output, SPDT, 24...250 VAC, 15(8)A
  • Scaled setpoint knob
  • Easy to install
  • Enclosures NEMA13 or NEMA4X
  • Maintenance-free in clean air applications

Sensor Performance
Relative humidity in air 0-100% rH (rF)
Operating range 30-100% rH (rF)
Condition non-aggressive air
Sensor element Polyga ® bands of multi-synthetic fibers, water-resistant, washable, saturation without damage
Accuracy above 50% rH (rF)+/- 3-3.5% rH (rF)
Accuracy below 50% rH (rF)+/- 4.0% rH (rF)
Permissible air velocity, maximum1575 ft/min (8 m/sec); with gauze protection: 2970 ft/min (15 m/sec)
Response time< 120 sec for 63% step change, at 394 ft/min (2 m/sec)
Type of Control
General On/Off, single stage control, with (1) microswitch output
Stage level/setpoint Field adjustable over the full operating range
dial knob range30-100% rH (rF)
hysteresis/switching differential 4-5% rH (rF), fixed
Microswitch SPDT, airtight
contact rating 24...250 VAC, 15(8)A
Working temperature 32°F to 140°F (0°C to 60°C)
Storage temperature -22°F to 140°F (-30°C to 60°C)
Humidity 0-95% rH (rF), non-condensing
Working pressure Atmospheric +/- 10%
Enclosure materialABS, fire-retardant
Enclosure colorWhite and light grey
Enclosure protectionRefer to the section: “Ordering Information” in datasheet
Probe materialHigh-grade steel, perforated, non-corroding
InstallationProbe into duct mount
Enclosure dimensions4.73 x 3.15 x 2.84 in. (120 x 80 x 72 mm)
Probe dimensionsŘ 0.63 - Ř 0.79 x 8.67 in. ( Ř 16 - Ř 20 x 220 mm)
Cable entry(1) M20 compression fitting, removable, hole fits 1/2 in conduit connector
Wire connectionTerminal block, screw type for lead wire
Wire sizeMax. 14 AWG (2.5 mm 2 )
Weight 1.6 lbs. (0.7 kg)
Approvals / Listings CE
Electromagnetic compatibility (EMC)resistance interference, conformity EN50082-2
interference emmission, conformity EN50081-2
Warranty 18 months material and workmanship

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.